Autowatch Ghost Immobiliser Installation
The Ghost is the most advanced aftermarket in the UK. immobiliser for CAN bus. It's discreet, doesn't use LED indications or key fobs and is concealed in the vehicle's wiring.
The user can also disable the system for a short period of time by using Transport Mode when renting out their car. This guide will guide you through the process of installing the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your vehicle from key hacking attacks, cloning and relay attacks. The system connects directly to your car's ECU and is protected by a unique pin code that you choose. It's undetectable to thieves using diagnostic scanners or other modern methods, and is not able to be disabled by cutting circuits.
The system is simple to use, but professional installation is advised to ensure a perfect connection with the ECU of your vehicle. A certified installer from Thatcham can assist in the installation and programming of your Ghost system. They can also suggest a tracking device or alarm system to complete the protection package for your vehicle.
To avoid the accidental deployment of short circuits or airbags, the installer must first remove your battery. Once the battery is disconnected, the installer may be able to work safely. Basic hand tools are helpful to make precise connections, while a multimeter can be used to check electrical values and safety. Cable ties and insulation tape are also necessary for securing connections and keeping wiring neat. Lastly, the user manual offers specific instructions tailored to the Ghost Immobiliser model you have.
During the installation, it is essential to choose an area for grounding that is free of paint and debris. Installers must also ensure that the immobiliser's wires, CAN H and can L are connected to the correct ECU ports. Depending on the model, these wires might need to be soldered or plugged into. Using a top-quality connector is recommended to ensure a sturdy and secure connection.
Once the install is complete Once the installation is completed, the customer can enable Transport Mode. This allows the vehicle to be utilized by valet parking companies or mechanics without needing to know the pin code. To accomplish this, the customer has to hit the service button on the dashboard 5 times within 2 seconds. After that the system will confirm with 5 indication signals.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA certified and Thatcham approved. It's a great option for anyone who regularly rents out their cars through platforms such as Turo. An immobiliser can reduce the cost of insurance, as it lowers the chance of theft.
Getting Started
You can't go far wrong with an autowatch immobiliser if you want to protect your vehicle from theft. It will stop your car from starting even when a criminal steals or copies the key. It's possible due to its advanced technology, which prevents the engine from starting until the right PIN code has been entered.
ghost immobiliser problems by connecting to the CAN bus network of your vehicle, allowing it to communicate with the ECU directly. It uses existing buttons on the dashboard and wheel to create a unique sequence only you can identify and makes it impossible for someone else to start your vehicle. This is the ultimate system to safeguard your pride and joy. It will not lose its value if you ever want to sell it.
Installing a ghost ignition is an easy process, however, it is crucial to follow the steps carefully to avoid issues with electricity and system malfunctions. You must first locate a 12V power supply and a good grounding on the car's chassis. After that, you can begin connecting the wires to the immobiliser. Be sure to use high-quality connectors and soldering methods to ensure a solid connection. Also, ensure that you cover the connections by using heat shrink tubing or insulation tape to protect them from electrical short circuits and other issues.
Once the wires have been connected, you can plug in the battery and start the engine to test whether the immobiliser works. Once everything is working properly you can place it in a safe location beneath the dash or anywhere else in the vehicle. Make sure to hide it well to prevent any thief from taking advantage of it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified, which means that it is in compliance with the highest standards of security and is a fantastic deterrent to car thieves. It provides superior protection against key cloning, hacking and relay attacks, and it can't be disabled without knowing the code. The device is also simple to use and is able to be put into a service valet mode so that your car is not activated when you take it in for maintenance or an MOT.
Wiring
The Ghost Immobiliser, a cutting technological security system, has been designed to prevent vehicle theft. It communicates with your vehicle's ECU and directly connects to the CAN bus. Unlike other aftermarket systems that require the removal of circuit components, the Ghost Immobiliser doesn't interfere with the factory settings of your vehicle.
The system is also unnoticeable by thieves using diagnostic scanners. The system doesn't send or receive radio frequency signals and instead uses CAN data for communication with your ECU. In addition, it doesn't need any modification to your vehicle's existing key fobs.
To use the Ghost Immobiliser, simply switch on the ignition of your car and enter your disarm sequence (either one or two buttons). The indicator will flash two times to confirm that you have entered the correct code. Once you've verified this, you're able to start your vehicle and leave in peace.
Once installed, Ghost Immobiliser safeguards your vehicle against key cloning or hacking while protecting its value. If you have to surrender your car for service or valet parking The Ghost Immobiliser can be temporarily disabled in Transport Mode.
You'll require a constant power source (12V) as well as an earthing point to complete the installation of a Ghost immobiliser. Ensure that these are both well-insulated and safe to touch. It's also recommended to use cable ties to bundle and secure the wires, since this reduces the risk of theft by thieves. Make sure you check the exact position of these points to avoid making mistakes and mark them with an adhesive or label. It's also a good idea to check every connection for signs of wear and tear. Make sure all connections are in place and properly protected. Make sure to test your Ghost Immobiliser once the installation is completed. This will confirm that the unit functions correctly and that all connections and insulation are safe. Make sure to address any issues immediately.
Testing
The Autowatch Ghost Immobiliser is an innovative vehicle security system that is integrated into your car's ECU to block the engine from starting without authorization. The innovative technology protects your vehicle from hacking and key cloning along with other methods employed by thieves to steal cars. The Ghost works in conjunction with existing tracking and alarm systems to provide the best security for your car. The Ghost's unique features, combined with its subtle design makes it a preferred choice for drivers who love cars and security-conscious drivers.
To ensure proper integration of the Ghost Immobiliser, it is essential to follow the steps of the installation procedure. The best place to start is to refer to the wiring diagram of your vehicle, which will serve as a guideline to locate and connecting the required wires. You'll then need to identify the power and grounding sources. Once you've found them then you'll need to mark them so that they're easy to identify when installing. In addition, it is vital to use only the best tools and materials. Hand tools are essential to assist you in making precise connections. A multimeter will check electrical values, and ensure safety. Cable ties and insulation tape will help keep all connections neat and tidy. A Ghost-specific user's manual is also available.
Before proceeding with the installation, it's important to test the system by entering the PIN code and then starting the vehicle. This will ensure that the immobiliser works according to plan, and prevents unauthorised vehicle starts. It is recommended that you perform this step regularly as part of your routine inspections of your vehicle to ensure that the system is always functioning correctly.
Once the installation has been completed, you can begin driving your vehicle with confidence. The Ghost will guard your pride and joy from thieves who might steal your car. It will ensure that no one is able to take your car away if they do not have the correct PIN code. The Ghost can also be paired with a tracker approved by Thatcham to identify any attempts at tampering or theft and allow you to track your vehicle if it is stolen.
The Ghost is compatible with a wide variety of automobiles, including those from all major manufacturers. If you are interested in protecting your car using this advanced device, contact Monty's Locksmith today to learn more about our installation and maintenance options. We are a TASSA Installer who is registered This certification ensures that we adhere to the strictest standards and procedures for installing our products. This reassures customers, insurers and law enforcement officials that all installations are completed in a safe and correct manner.