The Ghost Immobiliser
Immobilisers are a powerful tool in the fight against vehicle theft. They stop the car from being started without a key fob, and are effective in stopping hotwiring and traditional forms of vehicle theft. Modern methods such as key cloning or relay theft are becoming more common.
Created to counter these current trends The ghost immobiliser works to make your vehicle completely unnoticeable. It doesn't use LED indications radio signals, key fobs, and is quiet and discreet.
Easy to install
The Ghost Immobiliser is a revolutionary device that connects to the CAN data network within your vehicle to prevent key cloning and theft. It is a TASSA-approved device and insurance companies have endorsed it. It is silent and virtually unnoticeable to thieves. It makes use of buttons on your steering wheel, centre console and door panels to create an unique pin code sequence that has to be entered before you can start your car. You can create up to 20 different sequences to increase security. The system is simple to install and doesn't require any additional wiring or hardware.
It is recommended that you use a reputable immobiliser CAN installer who is specialized in your specific vehicle type to get the best results. Idealy, they should have a workshop near you where you can go to get your installation done. There is also various tools and materials that will assist you in the installation. These include hand tools, a multimeter, and insulation tape, as well as heat shrink tubing to protect the connections. A user's manual will give you the necessary instructions for your vehicle's wiring.
Before starting the installation remove the battery from the circuit to avoid short circuits and airbag deployment. Double-checking the CAN L and CAN H wires is crucial since a misidentification could lead to improper integration of the system. It is also a great idea to label or mark the wires. Additionally, you can make use of a multimeter to confirm that the identified power source is able to provide a consistent 12V power supply.
Advanced thieves can employ various methods to get around the Ghost Immobiliser, including jamming and using spoofing signals. These methods are based on amplifying signals from the key fob to your vehicle's electronic controller unit. With advanced anti-jamming technologies and vigilant monitoring your vehicle, it can be protected from these sophisticated attacks.
Enhanced security
A ghost immobiliser provides an additional layer of protection for your car against theft. It uses an PIN code protection system that is activated by pressing buttons on your steering wheel or dashboard which makes it difficult for thieves to gain access the device and take your vehicle. The device is also designed to be hidden within the vehicle, and is devoid of LEDs or other signals that would warn thieves of its presence. It connects directly to the ECU of your vehicle via the data bus. This means it isn't vulnerable to relay attacks or hacking.
The system is an excellent investment for those who own luxury cars, since they are at a higher risk of theft due to their worth and the popularity. Its enhanced features protect your car from key duplicates and ECU swapping. Ghost immobilisers can be integrated with apps, meaning you can arm and disarm quickly. They may include a service/valet setting that allows you to temporarily deactivate the immobiliser while your vehicle is undergoing repairs or maintenance.
Ghost immobilisers have another wonderful benefit: it doesn't require any cutting of wire. This is an excellent option, particularly if your vehicle is more recent and does not have an immobiliser built in. Certain systems are capable of integrating with a GPS tracking device, which can provide additional security for your vehicle. A GPS tracker could also lower the cost of insurance. If you decide to purchase a ghost immobiliser, ensure that it's TASSA-certified and an experienced installer installs the device for you.
Compatible with all major models and brands
The Ghost Immobiliser has been designed to work with all major vehicle models and makes, securing your precious possessions from theft. It utilizes buttons on your steering wheel, centre console or door panels to generate a unique pin code, which must be entered before you can drive your vehicle. The system is tamper-proof and undetectable. It's also is covered by a three-year warranty. It is also fully endorsed by insurance companies, which means that it can help to lower your insurance premiums.
The Ghost system is different from traditional immobilisers that rely on the key fob to provide ignition control. It is connected directly to the engine controller through the CAN bus. This means it's tamper proof, virtually impossible to remove or disable and cannot be targeted by organized car theft gangs. The Ghost system can also be paired with an iPhone app to monitor remotely and management.
You can choose an PIN code that is simple for you to remember but mathematically impossible for thieves to guess. The PIN can be customised and modified at any time, so you can keep your car safe even when it's parked on the street or in a parking lot. You can also select a valet or service mode if you need someone who is not driving your car temporarily such as when you're in the garage for servicing. This is a great way to prevent your car from being stolen by a shady mechanic. You can opt for the Ghost Call alert to give you more security. It will inform you when your car is moving or has been moved.
Convenience
The ghost immobiliser protects your vehicle from theft techniques like key relay or cloning. It is activated by connecting to the car's CAN network and preventing communication with the engine ECU. This system makes it difficult for thieves to hack or clone your vehicle.
Once installed, you will be required to enter a PIN number that is up to 20 digits using the buttons on your dashboard or steering wheel in order to start the engine. The system is completely concealed and unnoticeable to thieves since it doesn't emit any radio frequency signals. It can be set up with a PIN number that can be changed by the user, adding to its security. The system is designed to stop cutting of circuits, making it virtually impossible to hack.
If you do have a problem remembering your PIN, there are some systems that allow you to communicate with the immobiliser via an app on your smartphone, disarming it instantly. Some systems even have a valet/service setting that allows you to temporarily to start your car, for instance, when you drop it off at a garage or valet park.
The Ghost Immobiliser is also indetectable to thieves since it doesn't transmit radio signals, which is a significant advantage over other aftermarket vehicle security systems. It is also simple to use, and doesn't require complicated wiring. You can also use it together with a dash cam for added safety. Dash cams include the Thinkware F70, which features clear and crisp 1080p HD dashcam footage and Format Free Technology and parking mode. The system can also be hardwired for optimal performance and longevity.
Installation
If you're looking to secure your vehicle from theft it is important to select the right immobiliser ghost. This device can prevent car thefts by preventing the communication between key fobs and the engine controller unit. This stops thieves from stealing the signal and cloning the key fob to begin your vehicle. It can also detect if it has been tampered and notify the owner of the vehicle.
The device is easy to install and integrates with the existing systems of your vehicle. It requires no modification to the vehicle's wiring and can be tucked away in a secluded area, like under the dashboard. Follow the directions in the manual to ensure that the device is installed correctly. After installation, it is important to test the system. This will confirm that the immobiliser ghost works as intended.
You can purchase an Autowatch Ghost 2 immobiliser and then have it installed by a certified installer. ghost immobiliser problems will connect the Ghost to the CAN Bus network in your vehicle, which makes it difficult for thieves to steal or disable the system. The installation process generally takes between 2 and 3 hours.
During the installation process, it is recommended to look up the wiring diagram for your vehicle model. This will enable you to locate the CAN High and CAN Low wires needed to connect your Ghost to the engine of your vehicle. It is also important to double-check the connections to ensure that they are secure and properly insulated.
Once the installation is completed, you can begin using the Ghost Immobiliser as normal. It will disable the ignition of your vehicle if it is not started using the correct PIN code which you can create yourself. The ghost cost of immobilisers can also be put into Service/Valet mode in the event that you have to surrender your vehicle for maintenance or valet parking.